T.A.S.C. VIII Automatic Rectifier

The Corrpro® T.A.S.C. Series Rectifier is specifically designed to provide accurate, economical corrosion control for the submerged surfaces of steel water storage tanks and water/wastewater treatment units. The T.A.S.C. VIII is designed by NACE accredited cathodic protection engineers for optimum performance in accordance with ANSI/AWWA D104, Type A, IR Drop Free control standards.

The T.A.S.C. rectifier automatically monitors and adjusts the DC output required for optimum corrosion control. It is equipped with an automatic potential limit which is adjusted to maintain AWWA D104-97 and NACE criteria for optimum cathodic protection corrosion control while preventing over or under protection of the coated surface. Superior design, engineering and operation provide owner/operators with long life, low maintenance performance.

The standard digital display meters facilitate ease of monitoring with performance indicator lights on the front cabinet available as an optional extra feature. Each T.A.S.C. rectifier is both factory and jobsite tested to insure quality workmanship and performance.

  • Totally automatic control
    Eliminates IR drop error
  • Controls from 0 to 100 percent of rated output
  • Automatic current limiting
  • Soft-start circuitry to avoid high initial power-on inrush currents
  • Anti-spike technology for prevention of voltage/current overshooting after release of interruption
  • Full-wave silicon rectification
  • High-energy AC input surge protection
  • High-energy DC output surge protection
  • Secondary AC surge protection
  • Plug-in automatic control circuit board
  • Switch for automatic/manual operation
  • High-intensity LED digital meters
  • Transformer constructed to Class H (180°C/356°F) temperature requirements with a minimum efficiency of 95 percent
  • All brass/copper hardware finished in electroless nickel plate for superior corrosion prevention
  • Wall or pole mounting
  • One year warranty against defective components and faulty workmanship from date of purchase
  • Full complement of options to tailor the rectifier to the specific installation requirements
  • Control indicator LEDs
  • Single phase inputs: 115, 208, 230, 460 VAC., 60 cycle
  • Magnetic trip input circuit breakers and secondary fuses for full overload and short circuit protection
  • Standard 25-steps of tap adjustment
  • Output voltage range 20 or 30 volts DC
  • Output current range 5, 8 or 16 amperes DC
  • Special output or input ratings available on request
  • Metering: 2 percent meters, temperature compensated
  • Cooling by natural air convection
  • Operating ambient: -40° to +45°C (-40° to 113°F)
  • NEMA4X enclosure
  • Stainless steel hardware
  • Dead-front aluminum front panel

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 918.245.8791
Fax: 918.245.8798


Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
Materials Inquiries: cpcaquotes@aegion.com