Safetrack Ceramic Ferrule

Safetrack Ferrule
The Safetrack 2003 Ceramic Ferrule is an 8mm ferrule that goes in between the pin brazing unit and the brazing pin. The ceramic ferrule is used to isolate the pin brazing unit from the structure, minimising the heat transfer between the two points while also providing a non-metallic path. This forces the electrical path to go through the brazing pin, allowing it to complete the connection.
Pin Brazing is a fast and safe connection method that does not compromise the integrity of the structure or coatings on the structure. Pin brazing can be used for direct structure connections for cathodic protection or when used for permanent continuity bonds. Pin Brazing, unlike thermite welding, can be completed safely in all weather conditions. 
All Safetrack consumable items are sold in pre-packaged quantities of 100. When ordering, please indicate which consumables you will require. Please also keep in mind if you may require any wire to complete the task or an coating materials to coat the connection point or repair any coatings removed for the process.

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 1.866.CORRPRO
Fax: 713.460.6060
Email: CorrproSales@aegion.com

 


Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
cpcamaterials@aegion.com