AEGN
$24.36
+0.41

Thomas & Betts Ground Clamps

T&B 3903BU
Thomas & Betts offers a wide range of grounding options for water pipes for both above and below ground situations. The water pipe Ground Clamp from Thomas & Betts is UL rated for direct burial and comes CSA approved for that application. The ground clamp comes in a variety of sizes for pipes ranging as small as 1/2” and as large as 12” in diameter. All available sizes of ground clamps can terminate #4 to #4/0 AWG cables.
  • Bronze U-bolt material, Bronze saddle for pipe.
  • All sizes capable of terminating #4 - #4/0 AWG cable
  • 3902BU is for water pipes that range ½” to 1”
  • 3903BU is for water pipes that range 1-1/4” to 2”
  • 3904BU is for water pipes that range 2-½” to 3-1/2”
  • 3905BU is for water pipes that range 4” to 5”
  • 3906BU is for water pipes that are 6”
  • 3907BU is for water pipes that are 8”
  • 3908BU is for water pipes that are 10”
  • 3909BU is for water pipes that are 12””
Designed for waterpipe application, the ground clamp goes around the pipe and using the saddle as a brace, clamps around the pipe, forming a solid connection. The ground clamp is rated for direct burial but may also be used for above ground applications. The included cable saddle allows for clamp on connections of #4-#4/0 AWG Cables, but with the use of a crimp lug smaller cable may also be attached. 
Corrpro offers the water pipe ground clamp in all available sizes. When ordering the clamp, please indicate the size of pipe you are looking to attached the clamp onto and the quantity of clamps required to complete your project.

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 918.245.8791
Fax: 918.245.8798


Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
Materials Inquiries: cpcaquotes@aegion.com