LB-Flange Tab Assembly
- Offered in bolt hole sizes from 5/8” up to 3”
- Tab is welded onto a 1” hex plug with a 3/8” stud on the bottom side for terminating structure leads
- Can be assembled using an LB Conduit body or GUAB Conduit body for hazardous locations.
The LB flange tab assembly is designed with the option of bolting either the termination point of the rectifiers negative circuit of an impressed current cathodic protection system onto the structure or when permanent continuity bonds are transferring high amounts of current. With a 3/8” stud welded onto the back of the tab, the conductor wire can be terminated inside the LB conduit body, protecting the wire from the environment. The tab of the assembly is available in multiple hole sizes to work with most ANSI rated flange bolts.
When ordering the LB flange tab assembly, please indicate the hole size of the bolt the tab will be mounted into. Also, please indicate the number of conductors and AWG size of wire that is to be terminated inside the LB conduit body so the assembly can be sent with the correct terminating lungs. Please also keep in mind if any conduit, wire or teck cable may be required to complete the task.