Polyken 1600HT Tape
- High temperature corrosion protection tape
- Available in 2”, 4” and 6” widths and available in 50 ft rolls
- Maximum operating temperature 121°C (250°F)
- UV resistant
- 10-mil backing thickness, 20-mil adhesive thickness
Polyken 1600HT-30 is a high temperature tape, designed for use on girth welds for water, oil or gas pipelines. When applying the tape, first clean the pipe of all dirt and debris. Once the pipe is cleaned, an application of Polyken 1619 primer is required to complete the bond of the tape onto the pipe. Polyken 1600HT has a release liner with the tape. When installing, ensure the release liner is being removed and the adhesive side is applied to the pipe. Starting from one end of the exposed area, work the tape around the pipe, allowing a 50% overlap of the tape along the way to provide you with a coating layer and mechanical protection layer.
When ordering 1600HT-30, please keep in mind the number of rolls required to complete the task. Polyken tapes are sold in case quantities only and each case of 1600HT contains 2 squares of tape (one square = 100 square feet). Polyken 1619 primer is required to apply the tape and is available in 1 gallon pails.