AEGN
$24.00
-0.58

Polyken Primer 1027 Liquid Adhesive

Polyken 1027
Polyken Primer products are recommended when applying Polyken coating tapes. Polyken 1027 liquid adhesive primer is the recommended primer when applying Polyken 900-12 and 930-35 coating tapes. The liquid adhesive consists of butyl based elastomers blended with polymeric resins dissolved in an organic solvent. This provides an instant tack surface when applying the Polyken coatings, while also providing a uniformly smooth application on rough, reconditioned or grit-blasted pipe surfaces. 1027 liquid adhesive primer is available in 16 oz. spray cans or in 1 gallon pails. 
  • Butyl based elastomers blended with polymeric resins dissolved in an organic solvent
  • Maximum operating temperature of 85°C (185°F)
  • Available in 16 oz cans or 1 gallon pails
 
The Polyken 1027 liquid adhesive primer is the base layer when applying coating tapes. Once the pipes surface is clear of dirt and debris, you can apply the 1027 primer. 1027 can either be hand-brush applied or machine applied when large areas are needing to be coated. The 1027 can also be spray applied using the 16 oz spray cans. Once the area is prepped with 1027 primer, you can apply either Polyken 900-12 or 930-35. 
When ordering Polyken 1027 primer, please note how much primer would be required to complete the task, and how the primer is to be applied. 1027 primer is available in 16 oz cans, which are sold in case quantities only (12 per case), or in individual 1 gallon pails. Please keep in mind which Polyken tape would be best suited for your application when ordering.

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 918.245.8791
Fax: 918.245.8798


Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
Materials Inquiries: cpcaquotes@aegion.com