Zinc Drive-in Anode
- 2 lbs. Zinc Anode, manufactured to ASTM B-418-01 Type II alloy standards
- Assembly comes complete with 3m (10 ft.) of #10 AWG RWU-90 white cable
The 2lb drive-in anode is easy to install for an efficient cathodic protection solution. Using a drive-in tool, the anode should be installed within 2-3 feet of the intended structure. The anode comes with a 3m (10ft.) lead that gives you enough wire to attached the anode to the pipe using a clamp on or bolt on terminating connection.
When ordering the drive-in anodes, please identify the number of anodes you may require and if any connection methods are required to complete your task.