AEGN
$24.36
+0.41

Teflon Support Roller

Teflon Roller

When installing multiple sacrificial anodes inside a tank, it is extremely important to consider supporting the anode. Using a Teflon Anode Support Roller by Corrpro, not will you support the anode from sagging over time but you also can easily roll the anode into position from the access port. Made from Teflon and secured using Zinc coated Steel hardware, the support roller can be used in high temperature, high abrasion and corrosive environments. 

  • Made from pure Teflon
  • Zinc coated steel hardware included to secure the tank
  • Support Body is 2-1/2” wide and 1-3/4” tall, End caps are 1/2” wide and 3” tall
 
The Teflon support roller is to be installed inside the tank at the end of the anode support arm. Attached using the included hardware, the support roller isolates the anode from the support arm, not allowing the anode and structure metals direct contact. The roller and support arm will bear the weight of the anode so the anode does not sag over time. 

When ordering the anode support roller, please keep in mind the number of anodes that are required per assembly. Please indicate if you may also require the sacrificial anode, anode adaptor or adaptor lead to complete the installation. 

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 918.245.8791
Fax: 918.245.8798


Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
Materials Inquiries: cpcaquotes@aegion.com